Engines M192M / M191M / M245M / M234M / M282M / M281M
3.2.6.
INSTALLING THE STATOR ASSEMBLY
•
Replace the stator and Pick-up.
NOTE The Pick-Up cable must be placed between the upper
screw and the locating dowel.
•
Connect the minimum oil pressure switch terminal.
•
Clamp the wiring
•
Mount the wiring bracket and tighten the attachment
screw.
•
Tighten the stator and Pick-up attachment screws to
the specified torque value.
TIGHTENING TORQUE SETTINGS
Stator and Pick-up screws. 3 – 4 Nm
ENGINE
3 - 47