Engines M192M / M191M / M245M / M234M / M282M / M281M
3.6.3.
CHECKING/ADJUSTING VALVE CLEARANCE
•
Align timing marks to check valve clearance.
•
Check the valve-shim clearance with a feeler gauge. If
valve clearance is not as specified, loosen the check
nut and adjust the clearance value with a screwdriver.
Engines M245M / M281M / M191M / M234M / M282M (125
H
O - 150 - 200 cc)
2
Intake: 0.10 mm (cold)
Exhaust: 0.15 mm (cold)
Engine M192M (125 cc Aria)
Intake: 0.13 mm (cold)
Exhaust: 0.23 mm (cold)
ENGINE
3 - 83