UPDATING ENGINES M192M / M191M
4.2.12.
ASSEMBLY OF THE BRAKE LEVER AND CAM
•
Check the cam and rear brake stem for signs of wear.
•
If necessary, change the cam.
•
Mount two new O-rings and lubricate them with Fiat Z2
grease.
•
Assemble the cam and the lever on the engine casing.
Use the double tooth to align the two profiles.
•
Tighten the screw to the specified torque value.
TIGHTENING TORQUE VALUES
Screw: 11 ÷ 13 Nm
4 - 16
Engines M192M / M191M