Assembling The Driven Pulley - APRILIA M192M Workshop Manual

Engines M192M / M191M / M245M / M234M / M282M / M281M
3.1.16.

ASSEMBLING THE DRIVEN PULLEY

•
Fit the new oil seals (1) and O-rings (2) onto the mov-
ing half pulley.
•
Check parts in contact with the belt.
• Fit the half pulley (3) on the bushing with the special
tool:
Moving pulley-to-fixed pulley guide (4): 8140664
• Ensure that pins and collar show no signs of wear and
refit them.
• Lubricate the driven pulley assembly with approx. 6 g
of TUTELA MRM2 grease through a bent-end lubrica-
tor. Lubricate through one bushing inner hole until the
grease comes out from the opposite one. This must be
done to prevent the grease from going beyond the O-
rings.
ENGINE
3 - 19