ENGINE
3.3.7.
CHECKING THE OIL PUMP
•
Remove the two screws (1) and the oil pump cover (2).
•
Remove the inner rotor circlip (3).
•
Remove the oil pump shaft and circlip.
•
Remove rotors (4) and (5). Thoroughly wash with pet-
rol and blow with compressed air.
•
Reassemble rotors on pump body (6). Make sure that
the two marks (7) are visible.
•
Replace the pump shaft and circlip.
•
Use a feeler gauge to check the distance between the
outer rotor and the pump body.
Max. permitted gap: 0.20 mm
•
Check the distance between the rotors.
Max. permitted gap: 0.12 mm
3 - 56
Engines M192M / M191M / M245M / M234M / M282M / M281M