Use Of Products - APRILIA M192M Workshop Manual

Table of Contents

Advertisement

Engines M192M / M191M / M245M / M234M / M282M / M281M

1.7. USE OF PRODUCTS

1.7.1.
USE OF PRODUCTS
For all maintenance operations, use only the product listed below.
Listed materials have been tested for many years and are suitable for all the applications specified by the manufacturer.
NOTE Consumer goods with part numbers are available upon request (see table).
PRODUCT SPECIFICATIONS
LUBRICANT
Engine oil
Transmission oil
Fork oil
Bearings and other lubrication points
Battery terminals
Brake fluid
Engine coolant
PRODUCT
RECOMMENDED:
4T FORMULA RACING, SAE 5W - 40.
As an alternative to the recommended oils, it is possible to use select oils
having properties in compliance with or even above A.P.I. SJ specifica-
tions.
RECOMMENDED:
F.C., SAE 75W 90 or
75W - 90.
As an alternative to the recommended oil, use select oils having properties
in compliance with or even above A.P.I. GL3 specifications
RECOMMENDED:
F.A. 5W or
FORK 5W or
Should you wish to reach an average behavior between those offered by
F.A. 5W and by
F.A. 20W or
FORK 20W, mix the products as follows:
SAE 10W =
F.A. 5W 67% of the volume, +
volume.
FORK 5W 67% of the volume +
33% of the volume.
SAE 15W =
F.A. 5W 33% of the volume, +
volume.
FORK 5W 33% of the volume +
67% of the volume.
RECOMMENDED:
BIMOL GREASE 481 +
As an alternative to the recommended product, use select oil for rolling
bearings, useful temperature range -30°C...+140°C, dripping point
150°C...230°C, highly anticorrosive, water and oxidization resistant.
Neutral grease or vaseline.
The braking system is filled with
used as well) +
BRAKE 5.1 DOT 4 (DOT 5 compatible).
NOTE Before mixing different makes or types of oil, check their compatibil-
ity.
As an alternative to the recommended fluid, use fluids having properties in
compliance with or even above SAE J1703, NHTSA 116 DOT 4, ISO 4925
specifications.
RECOMMENDED:
ECOBLU – 40° C +
As an alternative to the recommended fluid, use fluids having properties in
compliance or even above basic ethylene glicol CUNA NC 956-16 specifi-
cations.
GENERAL INFORMATION
SUPERBIKE
4,
SAE
GEAR SYNTH, SAE
F.A. 20W, as an alternative
FORK 20W.
FORK 5W and by
F.A. 20W 33% of the
F.A. 20W 67% of the
Autofluid FR. DOT 4 (DOT 5 can be
COOL.
5W
40
or
FORK 20W
FORK 20W
GREASE SM2.
1 - 13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M191mM234mM282mM281mM245m

Table of Contents