Engines M192M / M191M / M245M / M234M / M282M / M281M
3.3.6.
REMOVING THE OIL PUMP
•
Take out the two bolts and remove the pump driving
pulley cover.
•
Insert a screwdriver in the pulley to prevent it from turn-
ing.
•
Remove center screw with Belleville washer.
•
Remove the pulley and chain.
NOTE It is advisable to mask the chain so as to maintain its
original turning direction.
•
Remove drive sprocket, washer and O-ring.
•
To remove the oil pump, loosen the two screws.
•
Remove the oil seal.
ENGINE
3 - 55