Engines M192M / M191M / M245M / M234M / M282M / M281M
3.1.26.
FITTING THE TRANSMISSION COVER
•
Ensure that centering dowels are in position.
•
Refit the cover and tighten the screws to the specified
torque.
•
Refit the oil filler/dipstick.
•
Apply "Super Rapido" (Quick-setting) thread locker
Loctite 242E and then refit the steel washer and the
driven pulley shaft nut.
•
Tighten the nut to the specified torque using the clutch
housing lock wrench (8140661).
•
Fit the plastic cover.
TIGHTENING TORQUE SETTINGS
Cover: 11÷13 Nm
Driven pulley shaft: 54 ÷ 60 Nm
ENGINE
3 - 29