Engines M192M / M191M
4.2.3.
ASSEMBLY OF SECTOR GEAR AND PINION
•
Grease the spring with JOTA 3 FS.
•
Mount the spring.
•
Replace the sector gear and load the spring with the
specific tool.
Spring compression tool: 8140264.
•
Refit the washer and circlip and tighten the kick-start
lever to the specified torque value.
TIGHTENING TORQUE VALUES
Bolt: 12-13 Nm (1.2 - 1.3 kgm)
•
Use the lever to load the spring and insert the pinion.
•
Refit the kick-start cover and tighten its attachment
bolts.
UPDATING ENGINES M192M / M191M
4 - 7