Removing The Driven Pulley Shaft - APRILIA M192M Workshop Manual

ENGINE
3.1.31.

REMOVING THE DRIVEN PULLEY SHAFT

•
Remove the transmission cover and the clutch assem-
bly.
•
Withdraw the driven pulley shaft from the bearing.
•
Remove the oil seal from the bearing. Be careful not to
damage its seat. Pull it out from the transmission side.
•
Remove the circlip.
• Withdraw the driven pulley shaft bearing.
3 - 34
Engines M192M / M191M / M245M / M234M / M282M / M281M