Engines M192M / M191M / M245M / M234M / M282M / M281M
3.2.2.
REMOVING THE FLYWHEEL
•
Lock the flywheel with the special tool:
Driving pulley lock wrench (Engines M191M / M234M /
M282M) (150 - 200 cc) (adjustable face wrench):
8106702
Driving pulley lock wrench (Engines M192M / M245M /
M281M) (125 cc): 8140535
•
Remove the nut.
WARNING
Use only the adjustable face wrench supplied
to prevent damage to the stator coils.
•
Remove the flywheel.
Flywheel puller 8140276
NOTE The 200 c.c. flywheel has a larger inertia weight.
ENGINE
3 - 43