Disassembly Of Driven Pulley Shaft - APRILIA C361M Workshop Manual

ENGINES C361M / C364M
3.10.2.

DISASSEMBLY OF DRIVEN PULLEY SHAFT

•
Remove the circlip from inside the cover.
•
Position the specific pipe on the inner race of the bear-
ing and on the side of the pulley shaft toothing. Use a
press to force out the driven pulley shaft.
•
Remove the outer oil shield.
•
Remove the two centring pins and place the cover on a
flat surface.
•
Position the specific tool on the inner race of the bear-
ing and force the bearing out with a press.
ENGINE
3 - 47