Setting Up Recording Schedule - Eneo PNR-5104 Operating Instructions Manual

Network Video Recorder
NOTE: If you remove a device for which some recording has been done and register the device again, the
NVR system considers the device as a new device. In this case, you can search or play back video recorded
→ →
before the device was removed as follows: go to the Play panel click the (Additional Menu) button
select Removed Devices.

Setting up Recording Schedule

Select the Recording Schedule menu and set up the recording schedule following the procedures below.
Refer to 6.1 Setting up Recording Schedule (p. 59) for details.
1. Click the Schedule Setup button at the bottom. The Schedule Setup window appears, and schedule
windows are displayed with the current settings for each Preset.
19