Eneo PNR-5104 Operating Instructions Manual page 22

Operating Instructions

Protocol: Select the protocol or manufacturer of the device to scan. Event related functions may not
be supported depending on the protocol that the device uses (supported for the iNEX protocol and
some versions of the ONVIF
be supported depending on the settings of the device.

Scan Mode: Select the scan mode. Clicking the Start Scan button displays the results in the list. If
the IP address range of the device is different from that of the NVR system, the iNEX program considers
the IP address invalid. In this case, you must change the device's IP address to register the device.
−
Auto Scan (LAN): Lists devices in a LAN environment (supported only for the network video devices).
If the device uses the ONVIF
have checked the Disable WS-Discovery Windows Service (fdPHost, FDResPub) box during
the software installation in Microsoft
uses the ONVIF
DHCP (Dynamic Host Configuration Protocol). If the device is networked via DHCP, connection
to the device may not be made properly depending on changes in the external network environment.
−
IP Address: Allows you to enter the IP address of a device. You can search more than one device
at a time by entering a range of IP addresses. It is recommended that the device not be networked
via DHCP (Dynamic Host Configuration Protocol). If the device is networked via DHCP, connection
to the device may not be made properly depending on changes in the external network environment.
−
DVRNS: Allows you to enter the device name registered on a DVRNS server if the device uses the
DVR Name Service (DVRNS) function. Ensure the DVRNS server information on which the device
is registered is correct (Service menu →
is not correct, the device will not be found.
−
Domain Name: Allows you to enter the device's domain name registered on a DNS server if the
device uses the Domain Name Service.

: Select the devices to register by checking the box beside each device name in the list. Selecting
the Select All box selects all devices in the list.
14
TM
Conformance and Axis protocol), and some other functions may not
TM
Conformance protocol, this function is supported only when you
®
TM
Conformance protocol, it is recommended that the device not be networked via
®
Windows Vista or later operating systems. Also, if the device
(System Setup) button). If the DVRNS server information