Chapter 9 - System Health & Status Monitoring; Health Monitoring - Eneo PNR-5104 Operating Instructions Manual

Operating Instructions
Chapter 9 — System Health & Status Monitoring
You can simultaneously check the system status and device status of registered devices.
First, check the following and run the Client program.
 The NVR system should be running.
 Devices should be added to a device group. Refer to Chapter 12 — Device Management (p. 89) for
details.

9.1 Health Monitoring

System health monitoring is supported in the Health panel (supported only for network video devices). If
the Health tab is not on the tab panel, go to the System menu, click New Tab and Health.
The Client program automatically displays the health monitoring results when the Health tab is added.
① Summary List: Displays the health monitoring status of devices for all device groups in summary.
−
Total: Displays the number of devices in all device groups.
−
Problem: Displays the number of devices where a problem is detected.
−
Unreachable: Displays the number of devices that are not connected.
−
Healthy: Displays the number of devices where no problem is detected.
② Detailed List: Displays the status of each device in detail.
−
Status: Displays the status (Healthy: No Problem detected; Problem: Video loss is detected or login
failed because of the lack of available screens or because the software version is invalid; Unreachable:
The device is not connected to the network).
−
Device: Displays the device name.
−
Model: Displays the device's model name.
−
Cameras: Displays the number of cameras supported by the device.
−
Problem: Displays details regarding the problem.
80