Alarm-Out; Figure 31 - Alarm-Out Settings Screen; Figure 32 - Alarm-Out Schedule Screen - Eneo DLR-2016/500V Operating Instructions Manual

16-channel, h.264
Table of Contents

Advertisement

User's Manual
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the
the number by highlighting it and using the Up and Down arrow buttons to increase and decrease the number. The
PTZ ID number can be set from 0 to 256.
Highlight the Setup... box and press the

Alarm-Out

Highlight Alarm-Out in the Devices menu and press the
the settings and establish a schedule for the alarm output from the DVR.
Figure 31 — Alarm-Out Settings screen.
Highlighting the Schedule tab causes the Schedule screen to display.
Figure 32 — Alarm-Out Schedule screen.
The Mode box allows you to set how the alarm reacts during the scheduled time. When set to On, the Alarm-Out is
active during the scheduled time. When set to Event, the Alarm-Out is only active when there is an Event during the
scheduled time.
The Channels box allows you to set which alarm outputs will be active. You can also select the DVR's internal buzzer.
The
box allows you to delete an alarm output schedule. You will be asked to confirm whether or not you really wish
to delete the schedule.
30
button. The Port Setup window appears.
Configure the port's setting based on the PTZ camera manufacturer's instructions.
button. The Alarm-Out screen allows you to change
The alarm output can be given its own title by highlighting
the box under the Title heading and pressing the
A virtual keyboard appears allowing you to enter the title.
Highlighting the box beside Dwell Time and pressing the
button allows you to set the dwell time of the alarm
output. Dwell times range from 5 seconds to 30 minutes.
You can add and edit alarm output schedules on this screen.
Highlight the + and press the
Highlighting the boxes under the Column heading and pressing
the
button allows you to edit the information in those
boxes.
The Day box allows you to select the days that the alarm
schedule will be active. The choices are: Sun, Mon, Tue, Wed,
Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to set the time that the alarm
schedule will be active in 15-minute increments from 00:00
to 24:00.
button. Change
button.
button to add a schedule.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents