Eneo PNR-5104 Operating Instructions Manual page 48

Operating Instructions
 Don't display broken frames: It is possible that frames will be broken or lost when using the RTP protocol
depending on the network environment. Select whether or not to display the broken frames in Live or
Play panels.
 Buffering Frame Count: Set up the number of buffering frames to use for the RTP protocol. The higher
the number is, the less the video stutter. The lower the number is, the higher the real-time monitoring.

Use Network Keyboard: Allows you to control the Client program by using a network keyboard. Set
up the port number that the Client program will use when it is controlled by a network keyboard. Selecting
Use large mouse cursor enlarges the mouse cursor size.
Map
− Event monitoring dwell: Set up the duration for video to be displayed on the map event spot screen.
− Minimum monitoring dwell: Set up the event monitoring dwell time for the current event when other
events are detected while event-detected video is displayed. Video from other events is displayed after
the preset time is expired.
 Instant Viewer: Set up the duration for the instant view to be displayed. Instant Viewer is displayed
when clicking a camera on a map.
40

Activate Auto Focusing: Enlarges the area
where the event-detected device is placed when
an event is detected.
− Focusing Event: Select a desired event for
auto focusing.
− Focusing Duration: Set up the duration for
auto focusing to last.
− Focusing Minimum Dwell: Set up the duration
for auto focus to last for the first detected event
when events are detected in more than one
device consecutively. Auto focusing moves to
the later detected event after the preset time
expires.
 Zoom Finder: Displays or hides the PIP screen.
The rectangle in the PIP screen indicates the
enlarged area. When set to Auto, the PIP screen
is displayed only while a canvas is enlarged.
 Map Event Spot: Video from the event-detected
camera is displayed on the map event spot screen
when an event is detected.