Chapter 10 - Log Search - Eneo PNR-5104 Operating Instructions Manual

Operating Instructions
Chapter 10 — Log Search
You can search log entries for the iNEX program and the devices.
First, check the following and run the Client program.
 The NVR system should be running.
 Devices should be added to a device group. Refer to Chapter 12 — Device Management (p. 89) for
details.
Log search is supported in the Report panel. If the Report tab is not on the tab panel, go to the System menu,
click New Tab and Report.
The various types of log entries are displayed. Clicking the right mouse button on a column header displays
a menu and allows you to sort data as you want.
Select a log type to search from the drop-down list.
 User Log: Displays log entries from the Client program.
 Health Log: Displays log entries of the system health monitoring for the registered devices.
 Admin Service Log: Displays log entries from the administration service.
 Recording Service Log: Displays log entries for the recording service.
 Streaming Service Log: Displays log entries for each streaming service for all registered streaming
services.
 Monitoring Service Log: Displays log entries for monitoring service.
 Device System Log: Displays system log entries from the devices.
 Device Event Log: Displays event log entries from the devices.
If the connection was not made properly, the network disconnection log is displayed (only for devices
registered on the recording service). Refer to Appendix – Network Disconnection Log (p. 143) for details.
82