Table of Contents
Advertisement
OUTPUT
60Hz, 1080p 50Hz, 1080p 60Hz). Default value is 720p 60Hz. If the monitor doesn't
(HDMI/VGA)
support some output type, it would be returned to the previous value.
2-3. Setup – Recording Mode
Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select
RECORD icon and press SEL button to enter the setup menu item. Navigate through the menu items using
◀ ▲ ▶ ▼
the control button (
▼
). To return to setup menu screen, press the ESC button.
Menu item
CHANNEL
Select a channel for applying the following settings using the control button (
Press SEL button to change the setting value of all channels at once. Once you select an
item, then press SEL to set value for all channels.
Use virtual keyboard for all setting on one screen as you want as bellow picture.
) and change the value of the menu item using the control button (
Figure 2.3.1. Recording mode setup screen
Table 2.3.1. Menu items in Recording mode setup
Description
26
◀ ▲ ▶
◀ ▲ ▶ ▼
).
Advertisement
Table of Contents
