Eneo PNR-5104 Operating Instructions Manual page 118

Operating Instructions
 Time: Set up the time for schedule time.
 Repeat, Repeat Period: Set up the interval and interval period. Events will be notified to the preset
users at the designated interval during the interval period.
2. Set the event condition by double clicking the Condition schedule window and selecting a desired Preset
of event condition.
− Name: Enter the Preset name.
− Select Target to produce event and event type: Select event types that trigger event notification.
110
 Name: Enter the Preset name.
 Color: Click the button and select a desired color. The
scheduled time section will be highlighted with the
selected color in the schedule table.
 Period: Set up the period for the schedule time.
Selecting the Infinite option causes continuous
notification based on the Condition, Action and Target
preset settings without limiting the period.
You can add a new Preset or edit a saved Preset by clicking
the Add or Modify button. Clicking the Add or Modify
button displays the following setup screen.