Getting Started; Running Service - Eneo PNR-5104 Operating Instructions Manual

Operating Instructions
NOTE: The following screen appears when using Microsoft
®
Windows Vista or later operating systems. It is recommended
that you check the Disable WS-Discovery Windows Service
(fdPHost, FDResPub) box. If you do not check the box, the iNEX
program cannot auto-scan devices using ONVIF
when scanning devices for device registration.
NOTE: .NET Framework and the Visual C++ Runtime Libraries are installed automatically, and it may take
some time. This installation step will be skipped if the programs are already installed on your computer
8. When the following screen appears, click the Close button
to complete the installation.
NOTE: After successfully installing the service, the service,
Service Manager program (the
notification area of the task bar) and Setup program run
automatically.

18.2 Getting Started

Running Service

When the federation service installed, the service runs automatically. You can
also start or stop running the service manually. Go to the Start Menu in the
federation server → Click iNEX → Run the Service Manager program.
130
TM
protocol
icon is displayed in the
Check the status of the service. If the service is not
listed as Working under Status, start the service
manually. Refer to 4.1 Service Manager (p. 23)
for details about the Service Manager program.
®
.