Eneo PNR-5104 Operating Instructions Manual page 107

Profiles
 Audio Source: Select a desired audio source from the list of audio sources supported in the device. When
None is selected, audio monitoring and recording for the device will not be supported.
 Audio Encoder: Select an audio encoder configuration. Clicking the See More button allows you to
check the details of the selected audio encoder configuration. Refer to Audio (p. 103) for details about
the audio encoder configuration.
 PTZ: Select a PTZ setting. When None is selected, PTZ control of the device will not be supported.
Video
− Frame Rate Limit: Select a maximum frame rate.
− Encoding Interval: Select an encoding interval. The higher the value, the higher the bit rate and the
worse the video quality.
Set up the profiles using the following procedures.
Select a profile from the profile list. Clicking
button allows you to add a new profile. → Set up
media. See the explanation below for details about
setting media. → Click the Apply button at the
bottom. → The settings are applied, and the NVR
system displays live video or records video based
on the settings of the selected profile.
 Video Source: Select the desired video source
from the list of video sources supported in the
device.
 Video Encoder: Select a video encoder
configuration. Clicking the See More button
allows you to check the details of the selected
video encoder configuration. Refer to Video
(p. 102) for details about the video encoder
configuration.
 Source Configuration: Displays the source
configuration information (Configuration: video
source, Name: source name, Use Count: the
number of profiles that use the source, Source
Token: the number of tokens).
 Encoder Configuration: Set up an encoder.
− Video Encoder Configuration: Select a video
encoder from the list of video encoders
supported in the device.
− Name: Assign a name to the selected video
encoder.
− Use Count: Displays the number of profiles
that use the selected video encoder.
− Encoding, Resolution, Quality: Select a video
compression codec, video resolution and video
quality. The frame rate cannot exceed 15 ips
when recording video with the H.264 codec
and 4CIF resolution if the device is a network
video transmitter.
Network Video Recorder
99