Log In - Eneo PNR-5104 Operating Instructions Manual

Log In

You are required to log in to the federation service when running the Setup and Client program.
Go to the Start Menu in the federation server or Client system → Click iNEX → Run the iNEX Setup or
iNEX Client program and enter login information.
 Site Name: Select the federation service to connect to from the list. Select Local Host as the default
setting if the federation service is running in the current system. You can add other federation services to
the list or modify information about the federation service in the list by clicking the
 User ID, Password: Enter your user ID and password. The default user ID is admin and default password
is 12345678. You can change the user ID and password in the User menu. Refer to Chapter 13 —
User Management (p. 105) for details.
 Remember my ID on this computer: Check the box if you want to save your ID for logging on.
 Restore last Live sessions: Check the box if you want to restore the previous live monitoring sessions
in the Live panel of the Client program (supported only for the Client program).
− Site Name, Service Address, Service Port: Designate the name
of the federation service and enter the IP address and port number
of the federation server (default: 11000).
Network Video Recorder
button at the right.
131