Managing Devices - Eneo PNR-5104 Operating Instructions Manual

Operating Instructions

12.2 Managing Devices

Click a device group in the Site panel and then click a device in the Site List panel. Clicking the
at the bottom of the Site List panel, or clicking the right mouse button displays the device menu.
 Edit Device: Allows you to change information for connection to the device and each Preset of Recording
Schedule – Action. Refer to Editing Device Information (p. 93) for details.
 Remote Setup Device: Allows you to change the device's settings remotely. Refer to Changing
Device's Setting Remotely (p. 96) for details.
 Firmware Upgrade: Allows you to upgrade the device's software remotely (supported only for devices
which use the iNEX protocol). Refer to Upgrading Device's Software (p. 96) for details.
 Multiple Recording Setup: Allows you to set up each Preset of Recording Schedule – Action with the
same values for more than one device. This is supported only for the same type of devices (network
cameras/network video transmitters).
 Preview Video: Allows you to preview the device's video.
 Update Device Information: Allows you to update the registered device's information. If the input/
out devices connected to the registered device are not displayed in the list, it is recommended that you
update the registered device's information.
90
OR
button