Eneo PNR-5104 Operating Instructions Manual page 77

− Pink color bar/Gray color bar: Indicates the segment of video that is currently displayed/not
displayed on the screen when time overlap occurs. Clicking the
in the DVR Search panel allows you to change the segment to be displayed on the screen (Click
(Additional Menu) button → Select the Select Segment menu → Select a desired segment
the
→ The first image recorded within the selected segment is displayed on the screen).
NOTE: The NVR system or DVR's time and date have been reset to a time that is earlier than previously
recorded video, it is possible that there is more than one video segment in the same time range due to time
overlap. In this case, you can play recorded video during the overlapping time individually by selecting a
segment.
For example, when the NVR system or DVR has recorded
video from one to five o'clock and the user changes the time
backward from five to three o'clock and then continues
recording until six o'clock, there will be two segments from
three to five o'clock.
 Event Search Mode: When in the event search mode, the event list is displayed at the bottom of the screen
(supported only for the DVR Search panel). Clicking an event from the list displays the event-detected
image on the screen. Clicking the
Control Toolbar
The control toolbar is displayed over a selected camera screen when hovering the mouse cursor over the camera
screen. Hovering the mouse cursor over each button displays a tooltip for the button.

(Image Effect): Adjusts the image effect. Refer to Image Effect (p. 74) for details.

(Audio Play): Plays audio when playing back video that has recorded audio (1x1 screen format only).
Play Screen Menu
The screen menu is displayed when selecting a camera screen and clicking the right mouse button.
 Aspect Ratio: Select the proper image aspect ratio.
button in the top right corner of the event list displays next results.

(Object/Motion Search): Allows you to search for changes or motion in
recorded images in the NVR system. Refer to Object/Motion Search (p. 73)
for details.

(Image Zoom): Zooms in on the image. Refer to Zoom Control (p. 74) for
details.

(Color Control ): Adjusts the brightness, contrast, saturation and hue of the
current video. Clicking the
original image.
 Image Zoom: Functions as the same as clicking the button in the control
toolbar. See Control Toolbar (p. 72) for details.
 Object/Motion Search: Allows you to search for changes or motion in
the recorded images in the NVR system. Refer to Object/Motion Search
(p. 73) for details.
 Image Processing: Enhances playback images. Refer to Control Toolbar
(p. 72) for details.
Network Video Recorder
(Additional Menu) button
button cancels the adjustment and reloads the
69