Eneo PNR-5104 Operating Instructions Manual page 113

NOTES:
 If you remove a device for which some recording has been done and register the device again, the NVR
system considers the device as a new device. In this case, you can search or play back video recorded
before the device was removed as follows: go to the Play panel
→
select Removed Devices.
 Recording is not supported for DVRs.
1. Select the Storage Setup tab and click the Add button at the bottom.
2. The Add Storage window appears, and a list of available hard disk drives is displayed with information
about each drive.
3. Select a hard disk drive to allocate storage and click the Add button at the bottom. The Allocate Storage
window appears.
 Path: Displays the storage folder path.
 Drive Type: Displays the type of hard disk drive.
 Free: Displays the available storage capacity.
→
 Drive: Displays the drive name.
 Disk Type: Displays the type of hard disk drive.
 Capacity: Displays the total storage capacity and
available storage capacity.
Network Video Recorder
click the (Additional Menu) button
105