Setting Up Event-Based Recording - Eneo PNR-5104 Operating Instructions Manual

Operating Instructions

Setting up Event-Based Recording

During Event or Pre-Event recording, the NVR system records video based on the event detection for the
scheduled time (supported only for devices registered on the recording service). Event related functions
may not be supported depending on the protocol that the device uses (supported for the iNEX protocol and
some versions of the ONVIF
1. Set the schedule time by double clicking the Time Coverage schedule window, and then selecting a
desired Preset. The way to set up the schedule time for Event or Pre-Event recording is identical to the
way to set up for Time-Lapse recording. Refer to Setting up Time-Lapse Recording (p. 61) for details.
2. Set up the recording mode to Event Recording or Pre-Event Recording by double clicking the Condition
schedule window. Then select a desired Preset of event or pre-event condition.
Event Recording Condition
The NVR system records when predefined events are detected. This function may not be supported
depending on the protocol that the device uses (supported for the iNEX protocol and some versions of
TM
the ONVIF Conformance and Axis protocol).
60
TM
Conformance and Axis protocol).
You can add a new Preset or edit a saved Preset by clicking
the Add or Modify button. Clicking the Add or Modify
button displays the following setup screen.