Initial Turn-Up And Provisioning - Alcatel-Lucent 1850 TSS-320 Turn-Up And Commissioning Manual

Initial Turn-up and Provisioning

............................................................................................................................................................................................................................................................
Mini USB male
Pin 1
b. On PC, select Start -> Programs -> Accessories -> Communication ->
and click on Apply.
Click on File -> Properties and select "VT100" in the Emulation field.
Note:
Other terminal emulators can be used.
c. Connect the PC ethernet port to the EC320 ETH (LAN) port (20) by means of the
d. # reboot
e. when the program indicates PRESS CRTL C to stop the boot sequence, enter
f.
g. # disk-init FORMAT HARDDISK RAID (to format the hard disk)
h. # disk-init MOUNT
i. insert the USB key (on which the "keyfsimage" file have to be present) in the
j. # key-init
Two different procedures can be performed:
Loading procedure with SW package on PC hard disk
•
Loading procedure with SW package on USB key
•
These procedures are described in the following paragraphs.
............................................................................................................................................................................................................................................................
2 - 4
Signal
DTR
Hyperterminal -> and use the following settings (it is suggested to save these
settings to have a faster access in the following connections).
Select COM1:
Bits per second
Data bits
Parity
Stop bits
Flow control
The above step outlining the use of Hyperterminal is given as an example.
ethernet cable
In the following, the commands to be entered by the operator in the Hyperterminal
connection to the debug port (17) are in bold. After typing the command, press
ENTER.
CTRL C
# login root
EC320 USB connector (19)
SUB-D 9 pin female
Pin 4
38,400
8
None
1
None
Startup procedure
PN 8DG08136CAAA
Issue 1 March 2008