Tests and Measurements
............................................................................................................................................................................................................................................................
Purpose:
Check if the Virtual concatenated ETS cross-connection works properly at maximum
•
capacity of the Virtual concatenation group VC4-xV.
Let through data to check if the ports are properly connected to ODF
•
Alarms detection
•
Test instruments
Note:
Craft Terminal (E)
•
Pattern Generator/Error Detector (A)
•
x dB fixed attenuator
•
Accessories
Note:
Optical loop (K)
•
Single-mode or multi mode single-fiber splices (I) or (Q), according to the interface
•
type
Craft Terminal cable (L)
•
............................................................................................................................................................................................................................................................
PN 8DG08136CAAA
Issue 1 March 2008
See
Table 3-1, "Instruments" (p.
See
Table 3-2, "Accessories" (p.
Local testing and operating sequence
3-2).
3-2).
3 - 2 1