Tests and Measurements
............................................................................................................................................................................................................................................................
........................................................................................................................................................................................................................
3
Select one of the two ETB Ethernet local ports. From the pop-up menu, select "Configure
Ethernet port."
In "Ethernet port Configuration" window, select "Configuration" tag and set "Up" in
•
"Admin. Status" field. Click on "OK."
........................................................................................................................................................................................................................
4
Select the other ETB Ethernet local port. From the pop-up menu, select "Configure
Ethernet port."
In the "Ethernet port Configuration" window, select the "Configuration" tag and set
•
"Up" in "Admin. Status" field. Click on "OK."
In the "1850 TSS Service Management.." window, select the node on top of the list,
•
open the pop-up menu, and select "VLAN Registration."
In the "VLAN Registration List" window, insert the value of the VLAN is being
•
created (i.e., 10) in the "New VLAN" field and click on "Create."
In the "VLAN Registration Management" window, select the local port in "Available
•
Network Ports" and click on the >> button to get the VLAN identifier. The selected
board will be displayed in the "Tagged Ports" field. Perform the same procedure on the
other ETB Ethernet local port.
........................................................................................................................................................................................................................
5
Click on "OK" and "Apply," and then close the "VLAN Registration List" window.
............................................................................................................................................................................................................................................................
PN 8DG08136CAAA
Issue 1 March 2008
Local testing and operating sequence
3 - 3 7