Ec Debugger Cable Pinout - Alcatel-Lucent 1850 TSS-320 Turn-Up And Commissioning Manual

Tests and Measurements
............................................................................................................................................................................................................................................................
Ref.
[J]
[K]
[L]
[M]
[N]
[O]
[P]
[Q]
[R]
[S]
[T]
Table 3-3 EC debugger cable pinout
Mini USB male
PIN 3
PIN 2
PIN 5
PIN 1
............................................................................................................................................................................................................................................................
PN 8DG08136CAAA
Issue 1 March 2008
Accessories
Shielded pair
Optical loop
PC cable
EC debugger cable
LAN cable
USB key
Cables for synchronization
Multi-mode single-fiber
splices
Fixed attenuators
(suggested)
Fixed attenuators
(suggested)
Cleaning kit for optical
fibers
Signal
TX
RX
GND
DTR
Instruments, accessories and related documents
Qty.
2 Termination:
Instrument (F)/(A)
SUB.D 37-pin male connector for 2 Mbit/s
SUB.D 50-pin male connector for service
channels RJ45 for Ethernet ports
4 Terminations dependent on unit/pack/ODF
connectors
1 Refer to the Product Information Guide.
1 Refer to the Product Information Guide.
1 Termination:
RJ45 connector (LAN port) on PC (RS-232)
RJ45 connector on EC320 (Debugger port) - (20)
1 Termination:
USB connector on EC320 (USB interface) - (19)
Minimum 256M
1 Termination:
Instrument (G) Frequency Counter
Synchronization termination (120 or 75 ohm)
4 Terminations dependent on unit/pack/ODF
connectors, power meter and attenuator
1 Suggested values: 1, 2,3,4,5,6,10 dB - MU type
1 Suggested values: 1, 2,3,4,5,6,10 dB - SC type
1 Add fiber cleaning appendix
SUB-D 9 pin female
PIN 3
PIN 2
PIN 5
PIN 4
Characteristics
3 - 3