Alcatel-Lucent 1850 TSS-320 Turn-Up And Commissioning Manual page 57

Tests and Measurements
............................................................................................................................................................................................................................................................
Connect the Pattern Generator/Error Detector and check that the LOS alarm
•
disappears (green square) and that the on-board led related to the 10 GbE port under
test is green.
Open the SONET loop to check the presence of the TSF alarm on the remote port, as
•
described in the following:
– Select a remote port. From the pop-up menu (click on the right button of the
– In "Ethernet port Configuration" window, select "Configuration" tag and set "Up"
– Select the remote port again, open the pop-up menu and select "Ethernet Port
Connect the instrument and check that the alarms (LOS and TSF) disappear.
•
– The alarm signalling is also displayed in the CT main window, by a red circle on
E O
N D
........................................................................................................................................................
TL1 Procedure
........................................................................................................................................................................................................................
1
Cross-connect the 10 GbE port (on PIM10GE) to the SONET OC-192 port via the
multiservice PIM (PIMMS) and the Matrix (MT320)
........................................................................................................................................................................................................................
2
By CT create a number of active VC4-xV (x = 1 to 64, 7 VC4 are used in current example,
VC4-7V) on PIMMS, as shown in
concatenated group (VC4-7V) and STM-N port" (p.
........................................................................................................................................................................................................................
3
Cross-connect the VC4-7V to an SONET port (OC-192), as shown in
"Unprotected, bi-directional cross-connect: concatenated group (VC4-7V) and STM-N
port" (p.
........................................................................................................................................................................................................................
4
Cross-connect the VC4-7V to the 10 GbE PIM (PIM10GE), as shown in
"Cross-connection between a local and a remote data port" (p.
............................................................................................................................................................................................................................................................
PN 8DG08136CAAA
Issue 1 March 2008
mouse), select "Configure Ethernet port."
in "Admin. Status" field. Click on "OK."
Properties." Open the "Alarms" tag and check the presence of the TSF alarm (red
square).
the left of the port
S
F T E P S
4-9).
Chapter 4, "Unprotected, bi-directional cross-connect:
4-9).
Local testing and operating sequence
Chapter 4,
Chapter
4-12).
4,
3 - 3 1