Call Display - Yealink SIP-T48G Administrator's Manual

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
4. Select the desired value from the pull-down list of Backlight Time (seconds).
5. Click Confirm to accept the change.
To configure the backlight via phone user interface (take SIP-T46G IP phones for
example):
1. Press Menu->Basic->Display->Backlight.
2. Press
Backlight Active Level field.
3. Press
Backlight Inactive Level field.
4. Press
Backlight Time field.
5. Press the Save soft key to accept the change.
Display contact photo allows the IP phone to present the contact avatar when it
receives an incoming call, dials an outgoing call or engages in a call. Display contact
photo feature is only applicable to SIP-T48G/T46G/T29G IP phones.
Display called party information allows the IP phone to present the callee identity in
addition to the presentation of caller identity when it recevices an incoming call.
74
or , or the Switch soft key to select the desired level from the
or , or the Switch soft key to select the desired value from the
or , or the Switch soft key to select the desired time from the