Yealink SIP-T48G Administrator's Manual page 295

Parameters
Description:
Enables or disables the IP phone to play a warning tone when receiving an intercom
call.
0-Disabled
1-Enabled
Note: It works only if the parameter "features.intercom.allow" is set to 1 (Enabled).
Web User Interface:
Features->Intercom->Intercom Tone
Phone User Interface:
Menu->Features->Intercom->Intercom Tone
features.intercom.barge
Description:
Enables or disables the IP phone to automatically answer an incoming intercom call
while there is already an active call on the IP phone.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the IP phone will handle an incoming intercom call like a
waiting call while there is already an active call on the IP phone.
If it is set to 1 (Enabled), the IP phone will automatically answer the intercom call
while there is already an active call on the IP phone and place the active call on
hold.
Note: It works only if the parameter "features.intercom.allow" is set to 1 (Enabled).
Web User Interface:
Features->Intercom->Intercom Barge
Phone User Interface:
Menu->Features->Intercom->Intercom Barge
To configure intercom via web user interface:
1. Click on Features->Intercom.
Configuring Basic Features
Permitted Values Default
0 or 1 0
281