Page 1
Avaliable for a SIP-T58V/T58A/T56A IP phone: Wall Mount Quick Installation Guide for SIP-T29_T27_T4X_T5X IP Phones Wall Mount Bracket Quick Installation Guide Avaliable for a SIP-T48S/T48G IP phone: This quick installation guide provides step-by-step instructions for mounting your IP phone to a wall.
Page 2
1.Pull silica gels out of the two wall mount slots. (Only for the SIP-T48S/T48G IP Phone) 1. Pull the hookswitch tab in the handset cradle. 2. Rotate the hookswitch tab 180 degrees. 3. Reinsert the hookswitch tab. WALL WALL www.yealink.com Wall Mount Quick Installation Guide...
Page 3
2. Insert the tabs on the wall mount bracket into the Mounting the Wall Mount Bracket slots on the back of IP phone. And then slide the wall Yealink provides the wall mount drilling template for mount bracket to right. each IP phone model, which locates and marks the...
Page 4
IP phone to the wall, as shown below 86.9mm (Take a SIP-T46G IP phone as an example): Max:8mm Max:4.5mm (0.315”) (0.177”) Min:6.5mm (0.256”) 126.6mm For SIP-T29G/T27P/T27G IP phones: 65mm Screw position 73mm Max:8mm Max:4.5mm (0.315”) (0.177”) Min:6.5mm (0.256”) 130mm Copyright 2017 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD. www.yealink.com...