Yealink SIP-T48G Administrator's Manual page 444

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
Description:
Configures the threshold value of one way delay (in ms) that causes the phone to
send a warning alert quality report to the central report collector.
For example, If it is set to 500, when the value of one way delay computed by the
phone is less than or equal to 500, the phone will send a waring alert quality report
to the central report collector; when the value of one way delay computed by the
phone is greater than 500, the phone will not send a warning alert quality report to
the central report collector.
If it is set to blank, warning alerts are not generated due to one way delay. One-way
delay includes both network delay and end system delay.
Web User Interface:
Settings->Voice Monitoring->Warning threshold for Delay
Phone User Interface:
None
phone_setting.vq_rtcpxr_delay_threshold_critical
Description:
Configures the threshold value of one way delay (in ms) that causes phone to send
a critical alert quality report to the central report collector.
For example, If it is set to 500, when the value of one way delay computed by the
phone is less than or equal to 500, the phone will send a critical alert quality report to
the central report collector; when the value of one way delay computed by the
phone is greater than 500, the phone will not send a critical alert quality report to the
central report collector.
If it is set to blank, critical alerts are not generated due to one way delay. One-way
delay includes both network delay and end system delay.
Web User Interface:
Settings->Voice Monitoring->Critical threshold for Delay
Phone User Interface:
None
phone_setting.vq_rtcpxr.states_show_on_web.enable
Description:
Enables or disables the voice quality data of the last call to be displayed on web
interface at path Status->RTP Status.
0-Disabled
430
Parameters
Permitted
Default
Values
10 to 2000 Blank
0 or 1 0