Yealink SIP-T48G Administrator's Manual page 425

3. Enter the desired time interval in the Packet Interval (1~3600s) field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click OK to reboot the phone.
To configure LLDP feature via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->LLDP->LLDP Status.
2. Press or
Status field.
3. Enter the priority value (1-3600s) in the Packet Interval field.
4. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
CDP (Cisco Discovery Protocol) allows IP phones to receive and/or transmit
device-related information from/to directly connected devices on the network that are
also using the protocol, and store the information about other devices.
Procedure
CDP can be configured using the configuration files or locally.
Configuration File
Local
, or the Switch soft key to select the desired value from the LLDP
<y0000000000xx>.cfg
Web User Interface
Configuring Advanced Features
Configure CDP .
Parameters:
network.cdp.enable
network.cdp.packet_interval
Configure CDP .
411