Yealink SIP-T48G Administrator's Manual page 51

Parameters
network.ip_address_mode
Description:
Configures the IP address mode.
0-IPv4
1-IPv6
2-IPv4 & IPv6
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->Internet Port->Mode (IPv4/IPv6)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IP Mode
network.internet_port.ip
Description:
Configures the IPv4 address when the IP address mode is configured as IPv4 or IPv4
& IPv6, and the Internet (WAN) port type for IPv4 is configured as Static IP Address.
Example:
network.internet_port.ip = 192.168.1.20
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Basic->IPv4 Config->Static IP Address->IP Address
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port->IPv4->Static IPv4 Client->IPv4
network.internet_port.mask
Getting Started
Permitted Values Default
0, 1 or 2
IPv4 Address Blank
Subnet Mask Blank
0
37