Yealink SIP-T48G Administrator's Manual page 381

The following table lists pre-defined variable values.
Variable Value
$mac
$ip
$model
$firmware
$active_url
$active_user
$active_host
$local
$remote
$display_local
$display_remote
$call_id
Procedure
Action URL can be configured using the configuration files or locally.
Configuration File
The MAC address of the IP phone
The IP address of the IP phone
The IP phone model
The firmware version of the IP phone
The SIP URI of the current account when the IP phone
places a call, receives an incoming call or establishes
a call.
The user part of the SIP URI for the current account
when the IP phone places a call, receives an incoming
call or establishes a call.
The host part of the SIP URI for the current account
when the IP phone places a call, receives an incoming
call or establishes a call.
The SIP URI of the caller when the IP phone places a
call.
The SIP URI of the callee when the IP phone receives
an incoming call.
The SIP URI of the callee when the IP phone places a
call.
The SIP URI of the caller when the IP phone receives
an incoming call.
The display name of the caller when the IP phone
places a call.
The display name of the callee when the IP phone
receives an incoming call.
The display name of the callee when the IP phone
places a call.
The display name of the caller when the IP phone
receives an incoming call.
The call-id of the active call.
<y0000000000xx>.cfg
Configuring Advanced Features
Description
Configure action URL.
Parameters:
367