Yealink SIP-T48G Administrator's Manual page 63

2. Select Auto Negotiate from the pull-down list of PC Port Active.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the phone.
To disable the PC port via web user interface:
1. Click on Network->PC Port.
2. Select Disabled from the pull-down list of PC Port Active.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the phone.
This section provides information on upgrading the IP phone firmware. Two methods of
firmware upgrade:
Manually, from the local system for a single phone.

Automatically, from the provisioning server for a mass of phones.

The following table lists the associated and latest firmware name for each IP phone
model (X is replaced by the actual firmware version).
IP Phone Model Associated Firmware Name
SIP-T48G
SIP-T46G
35.x.x.x.rom
28.x.x.x.rom
Getting Started
Firmware Name Example
35.80.0.20.rom
28.80.0.20.rom
49