Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
account.1.ptime = 20
Web User Interface:
Account->Advanced->PTime (ms)
Phone User Interface:
None
To configure the codecs to use and adjust the priority of the enabled codecs on a
per-line basis via web user interface:
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Codec.
4.
Select the desired codec from the Disable Codecs column and then click
The selected codec appears in the Enable Codecs column.
5.
Repeat the step 4 to add more codecs to the Enable Codecs column.
6.
To remove the codec from the Enable Codecs column, select the desired codec
and then click
7.
To adjust the priority of codecs, select the desired codec and then click
or
.
8.
Click Confirm to accept the change.
To configure the ptime on a per-line basis via web user interface:
1.
Click on Account.
2.
Select the desired account from the pull-down list of Account.
3.
Click on Advanced.
484
Parameters
.
Permitted Values
Default
.