Yealink SIP-T48G Administrator's Manual page 174

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
Procedure
Live dialpad can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
phone_setting.predial_autodial
Description:
Enables or disables live dialpad feature.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will automatically dial out the entered phone
number in the pre-dialing screen without pressing a send key.
Web User Interface:
Settings->Preference->Live Dialpad
Phone User Interface:
None
phone_setting.inter_digit_time
Description:
Configures the time (in seconds) for the IP phone to automatically dial out the
entered digits without pressing a send key.
Note: It works only if the parameter "phone_setting.predial_autodial" is set to 1
(Enabled).
Web User Interface:
Settings->Preference->Inter Digit Time (1~14s)
Phone User Interface:
None
160
<y0000000000xx>.cfg
Web User Interface
Parameters
Configure live dialpad.
Parameters:
phone_setting.predial_autodial
phone_setting.inter_digit_time
Configure live dialpad.
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-preference&q=load
Permitted Values
0 or 1
Integer from 1 to
14
Default
0
4