Yealink SIP-T48G Administrator's Manual page 152

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
Parameters
None
To create a dial-now rule via web user interface:
1. Click on Settings->Dial Plan->Dial-now.
2. Enter the desired value in the Rule field.
3. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the dial-now rule will apply to all accounts on
the IP phone.
4. Click Add to add the dial-now rule.
To configure the delay time for the dial-now rule via web user interface:
1. Click on Features->General Information.
138
Permitted Values Default