Yealink SIP-T48G Administrator's Manual page 531

<root_super_search> indicates the start of a template and </root_super_search>

indicates the end of a template.
The default display names of the directory lists are Local Directory, History, Remote

Phone Book and LDAP .
When specifying the priority of search results, the valid values are 1, 2, 3 and 4. 1 is

the highest priority, 4 is the lowest.
When enabling or disabling the desired directory list, the valid values are 0 and 1.

0 stands for Disabled, 1 stands for Enabled.
Procedure
Use the following procedures to customize a super search template.
Customizing a super search template:
1. Open the template file using an ASCII editor.
2. For each directory list that you want to configure, edit the corresponding string in
the file. For example, configure the local directory list, edit the following strings:
<item id_name="local_directory_search" display_name="Local Directory"
priority="1" enable="1" />
Where:
id_name="" specifies the directory list ("local_directory_search" for the local
directory list). Do not edit this field.
display_name="" specifies the display name of the directory list. We do not
recommend editing this field.
priority="" specifies the priority of search results.
enable="" enables or disables the directory list.
3. Edit the values within double quotes.
4. Place this file to the provisioning server.
The following shows an example of a super search template:
<root_super_search>
<item id_name="local_directory_search" display_name="Local
Directory" priority="1" enable="1" />
<item id_name="calllog_search" display_name="History" priority="2"
enable="1" />
<item id_name="remote_directory_search" display_name="Remote Phone
Book" priority="3" enable="0" />
<item id_name="ldap_search" display_name="LDAP" priority="4"
enable="0" />
</root_super_search>
Resource Files
517