Yealink SIP-T48G Administrator's Manual page 260

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
over that configured on a phone basis.
Web User Interface:
Account->Advanced->Group Call Pickup Code
Phone User Interface:
None
features.pickup.group_pickup_code
Description:
Configures the group call pickup code on a phone basis.
Example:
features.pickup.group_pickup_code = *98
Note: The group call pickup code configured on a per-line basis takes precedence
over that configured on a phone basis.
Web User Interface:
Features->Call Pickup->Group Call Pickup Code
Phone User Interface:
None
Group Call Pickup Key
For more information on how to configure the DSS Key, refer to
DSS Key on page 549.
linekey.X.type/ programablekey.X.type
Description:
Configures a DSS key as a group call pickup key on the IP phone.
The digit 23 stands for the key type Group Pickup.
For line keys:
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/T29G)
X ranges from 1 to 15 (for SIP-T42G/T41P)
X ranges from 1 to 21 (for SIP-T27P)
X ranges from 1 to 3 (for SIP-T23P/G)
246
Parameters
Parameters
Permitted Values
String within 32 characters
Appendix D: Configuring
Permitted Values
Refer to the
23
following content
Default
Blank
Default