Yealink SIP-T48G Administrator's Manual page 90

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
Details of Configuration Parameters:
phone_setting.contact_photo_display.enable
Description:
Enables or disables the IP phone to display contact avatar when it receives an
incoming call, dials an outgoing call or engages in a call.
0-Disabled
1-Enabled
Note: It is only applicable to SIP-T48G/T46G/T29G IP phones.
Web User Interface:
Settings->Call Display->Display Contact Photo
Phone User Interface:
None
phone_setting.called_party_info_display.enable
Description:
Enables or disables the IP phone to display the called account information when
receiving an incoming call.
0-Disabled
1-Enabled
Web User Interface:
Settings->Call Display->Display Called Party Information
Phone User Interface:
None
phone_setting.call_info_display_method
Description:
Specifies the call information display method when the IP phone receives an
incoming call, dials an outgoing call or engages in a call.
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
Web User Interface:
76
Parameters Permitted Values
0 or 1
0 or 1
Integer from 0 to 4
Default
1
0
0