Yealink SIP-T48G Administrator's Manual page 140

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
Phone User Interface:
None
custom_softkey_ring_back.url
Description:
Configures the access URL of the custom file for the soft key presented on the LCD
screen when in the RingBack state.
Example:
The following example uses HTTP to download the RingBack state file from the
"XMLfiles" directory on provisioning server 10.2.8.16 using 8080 port.
custom_softkey_ring_back.url = http://10.2.8.16:8080/XMLfiles/RingBack.xml
Web User Interface:
None
Phone User Interface:
None
custom_softkey_talking.url
Description:
Configures the access URL of the custom file for the soft key presented on the LCD
screen when in the Talking state.
Example:
The following example uses HTTP to download the Talking state file from the
"XMLfiles" directory on provisioning server 10.2.8.16 using 8080 port.
custom_softkey_talking.url = http://10.2.8.16:8080/XMLfiles/Talking.xml
Web User Interface:
None
Phone User Interface:
None
To configure softkey layout via web user interface:
1. Click on Settings->Softkey Layout.
2. Select the desired value from the pull-down list of Custom Softkey.
3. Select the desired state from the pull-down list of Call States.
4. Select the desired soft key from the Unselected Softkeys column and then
click
The selected soft key appears in the Selected Softkeys column. If more than four
126
Parameters
.
Permitted Values
URL within 511 characters
URL within 511 characters
Default
Blank
Blank