Yealink SIP-T48G Administrator's Manual page 89

The following figure shows an example of screen display when Display Called Party
Information feature is enabled on the phone. The following shows an incoming call from
1008 to 1009.
You can customize the call information to be displayed on the IP phone as required. IP
phones support five call information display methods: Number+Name, Name,
Name+Number, Number and Full Contact Info (display name<sip:xxx@domain.com>).
Note
SIP-T42G/T41P/T27P/T23P/T23G/T21(P) E2 IP phones have a limited display (up to three
lines) due to their smaller screen size.
Procedure
Web server type can be configured using the configuration files or locally.
Configuration File
Local
<y0000000000xx>.cfg
Web User Interface
Configuring Basic Features
Configure display contact
photo feature.
Parameter:
phone_setting.contact_photo_d
isplay.enable
Configure display called party
information feature.
Parameter:
phone_setting.called_party_inf
o_display.enable
Sepecify the call information
display method.
Parameter:
phone_setting.call_info_display
_method
Configure call display features.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-calldisplay&q=lo
ad
75