Yealink SIP-T48G Administrator's Manual page 472

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click OK to reboot the phone.
To configure the 802.1X authentication via phone user interface after:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->802.1x Settings.
2. Press
Mode field.
a) If you select EAP-MD5:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
b) If you select EAP-TLS:
1) Enter the user name for authentication in the Identity field.
2) Leave the MD5 Password field blank.
c) If you select EAP-PEAP/MSCHAPv2:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
d) If you select EAP-TTLS/EAP-MSCHAPv2:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
e) If you select EAP-PEAP/GTC:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
f) If you select EAP-TTLS/EAP-GTC:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
g) If you select EAP-FAST:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
3. Click Save to accept the change.
The IP phone reboots automatically to make the settings effective after a period of
time.
TR-069 is a technical specification defined by the Broadband Forum, which defines a
mechanism that encompasses secure auto-configuration of a CPE (Customer-Premises
Equipment), and incorporates other CPE management functions into a common
458
or , or the Switch soft key to select the desired value from the 802.1x