Yealink SIP-T48G Administrator's Manual page 62

Administrator's Guide for SIP-T2_Series_T4_Series IP Phones
files.
Procedure
PC port mode can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
network.pc_port.enable
Description:
Enables or disables the PC (LAN) port.
0-Disabled
1-Auto Negotiate
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->PC Port->PC Port Active
Phone User Interface:
None
To enable the PC port via web user interface:
1. Click on Network->PC Port.
48
<y0000000000xx>.cfg
Web User Interface
Parameters
Configure the PC port.
Parameter:
network.pc_port.enable
Configure the PC port mode.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network-pcport&q=load
Permitted Values
0 or 1
Default
1